Heating Rod for Finishing Mixed Liquid DR-4/380V/1.5KW
Published: 2019-12-07 17:58:01
Views: 2922
Category: Electric Heater Heating Tube
Product Description
Tube diameter: 8,10,12,14,16,20, etc.
Material: Stainless steel 201, stainless steel 304, 316, 310S, etc.
Length: Non-standard
Power: Non-standard
Voltage: 110V, 220V, 380V
Common straight rod type electric heating tubes are divided into single-end and double-end wiring. Their structure uses high-quality metal tube as the outer shell, with high-resistance electric heating wire formed by winding arranged along the axial center of the tube shell. The gap part is tightly filled with insulating material with excellent thermal conductivity and insulation. The tube diameter can be processed with positive or negative tolerance according to requirements. Ruigao Electric Heating recommends connecting and setting the temperature control first, then powering on the heating tube for use. Electric heating tubes for molds have the advantages of small size, high thermal efficiency, low cost, fast heating, easy installation, safety, reliability, and long life. When in use, they should be fitted as closely as possible to the mold to transfer heat more quickly. The gap is generally about 0.05mm-0.1mm. For example, if the mold hole diameter is Φ12mm, a tube diameter of Φ11.8-Φ11.9mm is suitable. 1. Specifications of electric heating tubes for molds: 1) Surface load: Ordinary: 1-4W/cm2, Imitation imported: 6-8W/cm2, Imported: 1-22W/cm2; 2) Lead-out: Internal lead wire, external connection wire; 3) Tube material: Stainless steel, iron, titanium tube; 4) Voltage: 12-660V; 5) Tube diameter: Φ3-Φ30mm, single tube length: 15mm-6000mm; 6) Standard lead wire: 200mm. 2. Uses of electric heating tubes for molds: 1) Small mold heating has been widely accepted by customers in modern industrial applications; 2) Heating by drilling holes in castings, mold heads, and molds for insertion; 3) In plastic and rubber machinery heating systems, such as flat vulcanizers and extrusion barrels; 4) Food, pharmaceutical production lines and sanitary fields; 5) Laboratory heat treatment tests; 6) Petroleum, cable, and chemical industries. 3. Usage precautions: The surface load design of electric heating tubes for molds is relatively high. Air heat transfer is slower than solid heat transfer, so they cannot be directly placed in air for dry burning. When temporarily not in use and stored in a warehouse, they should be kept in a dry place. If the insulation resistance drops below 1 megohm due to long-term storage, they can be dried in an oven at about 150-200°C for several hours, or the element can be powered on until it glows red, then turned off and allowed to cool naturally, which will restore the insulation resistance.
