Oil and Gas Field Special Electric Heater
Product Structure Features of Oil Field Heater: This product is composed of main materials and components such as metal tubular heating elements, stainless steel (iron) protective cover, temperature controller, etc. Its characteristics are: no noise, no smoke, no odor, uniform temperature and no dry heat during heating. Low thermal load, long service life, no maintenance and repair requirements, high mechanical strength, easy installation, beautiful appearance, and safe use.
2. Technical Standards
1.Thermal Equivalent (1KW):860 kcal/kWh
2.Enclosed Heating Standard Usable Space:10m3/kW
3.Temperature Control Range:0～55℃
4.Cold Insulation Resistance:≥10MΩ
5.****Control Current:15A
6.Power Frequency Impulse Voltage2kV Duration1min
7.Continuous Working Time:≥5000 Hours
8. Explosion-proof grade is ExdIIBT4, ExdIIBT6, ExdIICT6
3. Installation and Usage Methods
1.The four corners of the heater are provided with fixed mounting holes, each corner has three holes, any two holes can be used. First install the heater on the bracket, then fix it on the wall. The installation position should keep a distance of10 cm from any wall, and keep a distance of20 cm or more from the ground to prevent wall aging due to long-term use.
2.After connecting the power supply, adjust the temperature knob to the desired temperature, and the corresponding signal light will indicate.
4. Precautions
1.Warning: To avoid overheating, do not cover the heater.
2.If the power cord is damaged, it must be repaired by the manufacturer to avoid danger.
3.If the power cord is damaged, it must be repaired by the manufacturer to avoid danger.
