I. Purpose:
HRY2-220V/2KW sheathed electric heater is used for heating hydraulic and lubricating oil in hydraulic and lubrication devices, and can also be used for heating non-corrosive gases or liquids.
II. Features:
1. The HRY series sheathed electric heater consists of a heating core and a protective sleeve. The heating core uses tubular electric heating elements as the heat source, and the protective sleeve is made of thin stainless steel. It has a large heat dissipation area and fast heat transfer. The terminal device part is divided into ordinary type (using iron-made stretched cup-shaped housing) and special type (using bolted explosion-proof device housing seal). The special type meets the explosion-proof mark dIICT4. and the requirements of protection level IP65 series standards.
2. The electric heater is connected to the oil tank container body by flange. The protective sleeve isolates the heating core from the heated oil. When maintaining the electric heater, there is no need to drain the oil in the tank. Simply pull out the heating core and replace it with a new one, making maintenance convenient.
3. During design, the contact area between the protective sleeve and the heated oil should be considered to prevent local carbonization of the oil due to excessive heating temperature. This model of heater is only suitable for heating heat transfer oil or oils and media with good heat reception.
III. Main Technical Parameters:
Rated voltage: Single phase220V Three phase380V
Surface heating power: as far as possible ≤0.7/cm2 as design standard
Heat transfer temperature: ≤300℃
Working medium: Mineral
Working pressure: ≤0.8Mpa
Heater installation dimension: φ81mm
